Security
CCTV InstallationAccess ControlBiometrics & AttendanceElectric FencingAutomatic GatesFire Alarm SystemsSecurity Guards & K9Power & Electrical
Solar InstallationSolar & Power BackupElectrical InstallationSmart Home AutomationBuilding Management (BMS)IT & Networking
Networking & Wi-FiIT SupportCyber SecuritySystem IntegrationIntercom SystemsPA SystemsPOS SystemsQueue Management
A slim, standalone fingerprint reader for controlling a single door -- built for offices, shops and small buildings that need reliable biometric entry without a full networked access-control platform.
The F22 is a standalone fingerprint access-control reader from ZKTeco, one of the most established biometric hardware brands used across Kenya. It stores up to 3,000 fingerprints on the device itself, and communicates over TCP/IP, RS485 or Wiegand -- so it can work alone on a single door, wired directly to an electric lock, or as a reader feeding into a larger networked access-control panel for a multi-door site.
A single staff entrance that needs biometric control without a full multi-door system.
Controls a back office, stockroom or staff-only door.
A high-assurance door that shouldn't rely on a card that can be lost or shared.
A single controlled door within a larger residential access-control setup.
A dependable, well-documented reader to specify into a client's project.
Buy the unit alone and wire it in yourself, or hire your own electrician.
| Fingerprint capacity | 3,000 |
| Communication | TCP/IP, RS485, Wiegand |
| Relay output | 1 (electric lock/strike) |
| Mounting | Wall-mount, standard door frame |
| Brand | ZKTeco |
12V DC, from an adapter or shared with the controller/lock power supply.
Not applicable for this product. This is an access-control reader, not a recording device.
Optional -- a TCP/IP connection is only needed if integrating into a networked, multi-door access-control platform. Works standalone without a network.
Warranty terms are set by the supplying distributor and confirmed at the time of purchase -- ask us for the current terms before ordering.
Official ZKTeco datasheet available on request -- ask us on WhatsApp.
The F22 is one part of a bigger picture -- here's how it connects to the rest of what Qyvea offers.
The F22 can be installed two ways: as a supply-only unit for your own electrician, or as part of a Qyvea installation covering the reader, wiring, an electric lock if needed, and enrollment of authorized fingerprints. See Biometric Access Control for the full installation service, or Access Control Installation for a broader project overview.
A fingerprint reader occasionally needs sensor cleaning, a firmware check, or troubleshooting if it stops recognizing a registered print. Qyvea offers ongoing access control maintenance, whether the F22 was installed by us or by someone else, plus self-help guidance on our troubleshooting page.
The ZKTeco F22 is a standalone fingerprint reader used to control a single door -- it grants entry to enrolled fingerprints and can trigger an electric lock or strike, with an RS485/Wiegand/TCP-IP output for wiring into a controller or standalone use.
The F22 has a 3,000-fingerprint capacity, which comfortably covers a single office, shop or small building's staff and authorized users.
Both. You can buy the F22 alone from our store for self-installation or your own technician, or have Qyvea supply and install it as part of a full door access control setup.
The F22 is an access-control reader rather than a dedicated attendance terminal. For clock-in/clock-out reporting, ZKTeco's attendance-specific terminals (like the K40 or K50) are the better fit -- see our time attendance systems page.
Installation cost depends on the door, existing wiring and whether an electric lock also needs fitting. Qyvea provides a free site assessment and itemised quote alongside the unit price.
A fingerprint and keypad access control reader mounted beside a glass office door. Staff unlock the door with a fingerprint, with a PIN as a backup.
KES 10,000 unit price. Free site assessment if you'd like Qyvea to supply and install it.
The full installation service this product belongs to.
Compare the F22 against other ZKTeco and Hikvision readers.
Where a reader like the F22 is most commonly installed.
A real Qyvea installation, on video.