Home › Solar light guides › Installation and care

How to Test a Solar Light Before You Install It

By Qyvea Limited · Updated 20 October 2026 · 2 min read

It is much easier to fix a problem before you cement the pole. Test the light first.

Unbox and check

Check everything is in the box: light, bracket, pole, remote and batteries. Look for damage.

Leave the light in direct sun for a day so the battery fills.

Motion-sensor solar lights with the pole included. No wiring, no power bill. Pick your size:

Switch it on, check it comes on by itself at dusk, then walk past to test the motion sensor.

If it passes, install. If not, contact the seller with a video before you fix it.

In short: Charge it for a day and test at dusk before you cement the pole.

Is testing really necessary?

It saves time and money if there is a fault.

Can I test indoors?

You can check the light comes on, but the sun test needs outdoors.

Tell us where you want the light and we will recommend the right size, even if it means a cheaper one.