Quick answer
A monitored energizer checks the fence voltage and raises an alarm when a wire is cut, shorted to earth or pulled together. Splitting a boundary into zones (separate sections, each monitored) means the alarm tells guards which stretch has the problem, and lets one section be switched off for repairs without disabling the whole fence.
Real products, live prices, in stock now
See the actual productsLive prices from the Qyvea store
Shop all energizer products →Key takeaways
- Alarms trigger on cuts, shorts and low voltage.
- Zones tell responders where to go.
- Zoned fences are easier to fault-find and maintain.
- Link zone alarms to cameras and the gatehouse for fast verification.
01What triggers a fence alarm
- A wire cut or broken
- A live wire touching an earth wire or metal (short)
- Voltage dropping below a set level (vegetation, poor earth)
- Tampering with the energizer
- Power failure without backup
02Why zones
One zone
Alarm: 'somewhere on the fence'
Guard walks the whole boundary
Whole fence off for any repair
Several zones
Alarm: 'zone 3, east wall'
Nearest camera shows the spot
Only zone 3 off for repair
03Linking to CCTV and guards
Zone alarmGatehouse / monitoring alertCamera for that zoneGuard responseEvent logged
For estates, see estate perimeter security. False alarms? See electric fence alarm fault.
04Frequently asked questions
How many zones should my fence have?
Enough that each zone is short enough to find a problem quickly; long boundaries and estates benefit most.
Why does my fence alarm keep going off?
Usually vegetation, broken wires, loose connections or poor earthing.
Can the fence alarm send me a message?
With a GSM or monitoring module linked to the energizer, yes.
