Client portalSubscriptions, receipts, support Partner portalReferrals and commissions

+254 113 301 244 Shop

Access Control Maintenance for Factories & Industrial Sites in Kenya

Factories and industrial premises put more physical strain on security equipment than almost any other environment — dust, vibration, heat, and continuous shift operations. Systems here need servicing on a schedule that accounts for the harsher conditions, not the standard office interval. Qyvea services, diagnoses and repairs access control systems for factories & industrial sites, including systems installed by another company.

Doors, readers and biometrics — kept working properly.

Request Service Talk to a Technician

★★★★★ 4.6 on Google (57 reviews) Read reviews →

Why Access Control Needs Regular Servicing

Access control hardware takes constant physical use — doors opening dozens or hundreds of times a day, fingerprint sensors touched repeatedly, exit buttons pressed continuously. That wear adds up, and a reader or lock that's slowly degrading often isn't noticed until it fails completely.

Access control servicing typically covers:

Reader and biometric sensor testing
Door lock and strike function checks
Exit button and controller testing
Enrollment data and software sync review
Admin access verification
Written service reports

If your access control system was installed by another provider, we assess it on its own merits and tell you plainly what we can do.

Common Problems

Access Control Faults We Fix

The faults we're most often called to handle in factories & industrial sites.

Door Not Unlocking

Reader, strike/maglock, controller or wiring faults preventing normal access.

Door Stays Unlocked

Faulty lock relay, wiring fault, or controller misconfiguration.

Biometric Not Recognizing

Sensor wear, dirty scanner surface, or poor original enrollment quality.

Exit Button Faults

Faulty button, wiring, or relay preventing normal exit function.

Controller/Software Issues

Access control software not syncing correctly with the door controller.

Lost Admin Access

Recovering control of a system with unknown or lost admin credentials.

What We Check

A Full Access Control Service

Scoped to your specific site — this is the range of what a technician may inspect.

Reader function test

Lock/strike function test

Exit button test

Controller diagnostics

Biometric sensor cleaning

Enrollment data review

Power supply check

Wiring & connection check

Backup battery check

Door alignment check

Software sync check

Access log review

Credential audit

Written service report

Three Ways We Help

Repair, Prevent or Contract

Depending on the situation at your factory.

01 · ALREADY BROKEN

Fault Repair

For problems affecting the access control system right now.

Door Not Unlocking
Door Stays Unlocked
Biometric Not Recognizing
Exit Button Faults
Controller/Software Issues

Request Repair

02 · STILL WORKING

Preventive Service

For sites that want a scheduled check to catch issues early.

Reader and biometric sensor testing
Door lock and strike function checks
Exit button and controller testing
Enrollment data and software sync review
Admin access verification

Schedule Service

03 · ONGOING

Maintenance Contract

For sites that need guaranteed coverage and priority response.

Scheduled inspections
Priority response
Agreed response arrangement
Preventive + corrective coverage
Written reporting

Discuss a Contract

We Didn't Install It? That's Fine.

Properties change hands, contractors move on, and the original installer of your access control system may no longer be around. None of that means the system is beyond help.

We assess the existing equipment and configuration, then tell you plainly whether it can be:

Repaired as-is
Reconfigured
Upgraded in part
Partially replaced
Fully replaced, if that's genuinely the sensible option

We can't promise every third-party system is repairable sight unseen — some equipment is genuinely past its useful life — but we assess before we conclude that.

Process

How a Access Control Service Runs

Briefing

What's happening, and what should be reviewed.

Site Walk

Inspecting the relevant areas of your factory.

Diagnose

Equipment, wiring, power and configuration.

Report & Recommend

Written findings — repair, upgrade or replace.

Approve & Repair

Scheduled at a time that suits your operations.

Handover

Report and documentation for your records.

Technical Honesty

Repair, Upgrade or Replace?

Repair

Restore the existing reader, lock or controller where that is practical — most access faults are configuration, wear or connection issues.

Upgrade

Replace the specific reader, lock or controller that has failed or is outdated, while keeping usable wiring and door hardware.

Replace

Recommended where equipment is obsolete, damaged beyond practical repair, or no longer matches the site's access needs.

Factories & Industrial Sites We Service

Areas We Cover

Production Floor

Coverage over manufacturing and assembly areas.

Loading Bays

Vehicle and goods movement points.

Perimeter & Fencing

Boundary security around the site.

Staff Entrances

Employee access and time-clock areas.

Storage Yard

Outdoor materials and finished goods storage.

Control Room

Site security or operations control point.

FAQ

Common questions about access control maintenance

How often should access control systems be serviced in a factory?

Most factory sites benefit from servicing every 6 to 12 months, depending on usage and exposure to the elements.

Can you service systems installed by another company?

In most cases yes — we assess the equipment and its condition first, then confirm what can be serviced or repaired.

Do you offer maintenance contracts for factories & industrial sites?

Yes. Maintenance contracts are scoped to the number of devices, sites, and required response times — contact us to discuss what a contract would cover.

What if the equipment can't be repaired?

We tell you plainly and quote for the specific replacement needed, rather than repeated repair attempts on something that genuinely needs replacing.

Do you provide a written report after servicing?

Yes — every scheduled service visit includes a written record of what was checked, found, and recommended.

Can you audit who currently has access on our system?

Yes — an access log and credential audit is part of what we check on a service visit, where the system supports it.

Access Control Issue? Let's Sort It.

Tell us about your factory and the issue. We'll help figure out the right next step — repair, upgrade or a maintenance arrangement.

WhatsApp Qyvea Call +254 113 301 244

Diagnosis before repair

Any installer, assessed first

Written service reports