Client portalSubscriptions, receipts, support Partner portalReferrals and commissions

+254 113 301 244 Shop

Solar & Backup Power Maintenance for Factories & Industrial Sites in Kenya

Factories and industrial premises put more physical strain on security equipment than almost any other environment — dust, vibration, heat, and continuous shift operations. Systems here need servicing on a schedule that accounts for the harsher conditions, not the standard office interval. Qyvea services, diagnoses and repairs solar & backup power systems for factories & industrial sites, including systems installed by another company.

Inverters, batteries and changeover systems — checked before you need them.

Request Service Talk to a Technician

★★★★★ 4.6 on Google (57 reviews) Read reviews →

Why Solar & Backup Power Needs Regular Servicing

Backup power fails silently. A battery loses capacity gradually with no visible symptom until the exact moment of a power cut, when your CCTV, gates and access control need it most. Scheduled checks catch this before it becomes an outage.

Solar & backup power servicing typically covers:

Inverter function testing
Battery charge and capacity testing
Changeover switch testing
Panel output measurement
Load assessment against connected systems
Written service reports

If your solar & backup power system was installed by another provider, we assess it on its own merits and tell you plainly what we can do.

Common Problems

Solar & Backup Power Faults We Fix

The faults we're most often called to handle in factories & industrial sites.

Inverter Faults

Inverter failing to convert or deliver power correctly.

Battery Degradation

Reduced charge-holding capacity affecting backup runtime.

Changeover Failures

Automatic changeover between mains and backup not triggering correctly.

Panel Output Issues

Reduced solar panel output from dirt, damage or wiring faults.

Wiring/Connection Faults

Loose or corroded connections affecting the whole power chain.

Overloaded Systems

Backup power no longer sufficient for what's currently connected.

What We Check

A Full Solar & Backup Power Service

Scoped to your specific site — this is the range of what a technician may inspect.

Inverter function test

Battery charge/capacity test

Changeover switch test

Panel output measurement

Wiring & connection check

Charge controller check

Load assessment

Earthing check

Battery terminal cleaning

Panel cleaning & inspection

Monitoring system check

Backup runtime test

Fuse/breaker check

Written service report

Three Ways We Help

Repair, Prevent or Contract

Depending on the situation at your factory.

01 · ALREADY BROKEN

Fault Repair

For problems affecting the solar & backup power system right now.

Inverter Faults
Battery Degradation
Changeover Failures
Panel Output Issues
Wiring/Connection Faults

Request Repair

02 · STILL WORKING

Preventive Service

For sites that want a scheduled check to catch issues early.

Inverter function testing
Battery charge and capacity testing
Changeover switch testing
Panel output measurement
Load assessment against connected systems

Schedule Service

03 · ONGOING

Maintenance Contract

For sites that need guaranteed coverage and priority response.

Scheduled inspections
Priority response
Agreed response arrangement
Preventive + corrective coverage
Written reporting

Discuss a Contract

We Didn't Install It? That's Fine.

Properties change hands, contractors move on, and the original installer of your solar & backup power system may no longer be around. None of that means the system is beyond help.

We assess the existing equipment and configuration, then tell you plainly whether it can be:

Repaired as-is
Reconfigured
Upgraded in part
Partially replaced
Fully replaced, if that's genuinely the sensible option

We can't promise every third-party system is repairable sight unseen — some equipment is genuinely past its useful life — but we assess before we conclude that.

Process

How a Solar & Backup Power Service Runs

Briefing

What's happening, and what should be reviewed.

Site Walk

Inspecting the relevant areas of your factory.

Diagnose

Equipment, wiring, power and configuration.

Report & Recommend

Written findings — repair, upgrade or replace.

Approve & Repair

Scheduled at a time that suits your operations.

Handover

Report and documentation for your records.

Technical Honesty

Repair, Upgrade or Replace?

Repair

Restore the existing inverter, battery or wiring where practical — some faults are repairable without full replacement.

Upgrade

Replace the specific battery, inverter or panel that has failed or is undersized for current load, keeping the usable infrastructure.

Replace

Recommended where the system is obsolete, damaged beyond practical repair, or genuinely too small for what it now needs to power.

Factories & Industrial Sites We Service

Areas We Cover

Production Floor

Coverage over manufacturing and assembly areas.

Loading Bays

Vehicle and goods movement points.

Perimeter & Fencing

Boundary security around the site.

Staff Entrances

Employee access and time-clock areas.

Storage Yard

Outdoor materials and finished goods storage.

Control Room

Site security or operations control point.

FAQ

Common questions about solar & backup power maintenance

How often should solar & backup power systems be serviced in a factory?

Most factory sites benefit from servicing every 6 to 12 months, depending on usage and exposure to the elements.

Can you service systems installed by another company?

In most cases yes — we assess the equipment and its condition first, then confirm what can be serviced or repaired.

Do you offer maintenance contracts for factories & industrial sites?

Yes. Maintenance contracts are scoped to the number of devices, sites, and required response times — contact us to discuss what a contract would cover.

What if the equipment can't be repaired?

We tell you plainly and quote for the specific replacement needed, rather than repeated repair attempts on something that genuinely needs replacing.

Do you provide a written report after servicing?

Yes — every scheduled service visit includes a written record of what was checked, found, and recommended.

Can you check whether our backup power can support our security systems specifically?

Yes — load assessment against your connected CCTV, gates and access control is part of what we check during a service visit.

Solar & Backup Power Issue? Let's Sort It.

Tell us about your factory and the issue. We'll help figure out the right next step — repair, upgrade or a maintenance arrangement.

WhatsApp Qyvea Call +254 113 301 244

Diagnosis before repair

Any installer, assessed first

Written service reports