Client portalSubscriptions, receipts, support Partner portalReferrals and commissions

+254 113 301 244 Shop

Networking Maintenance for Factories & Industrial Sites in Kenya

Factories and industrial premises put more physical strain on security equipment than almost any other environment — dust, vibration, heat, and continuous shift operations. Systems here need servicing on a schedule that accounts for the harsher conditions, not the standard office interval. Qyvea services, diagnoses and repairs networking systems for factories & industrial sites, including systems installed by another company.

Switches, cabling and Wi-Fi — kept reliable for every connected system.

Request Service Talk to a Technician

★★★★★ 4.6 on Google (57 reviews) Read reviews →

Why Networking Needs Regular Servicing

Most CCTV, access control and biometric faults that look like a 'camera problem' or a 'door problem' are actually a network problem underneath. A degrading switch, a loose patch cable, or an IP conflict can silently affect several systems at once until someone checks the network itself.

Network servicing typically covers:

Switch and router function testing
Cable and port testing
Wi-Fi coverage verification
IP configuration review
Firmware update checks
Written service reports

If your networking system was installed by another provider, we assess it on its own merits and tell you plainly what we can do.

Common Problems

Networking Faults We Fix

The faults we're most often called to handle in factories & industrial sites.

Network Downtime

Faults affecting CCTV, access control or other networked devices site-wide.

Switch/Router Faults

Failed or overloaded network hardware.

Wi-Fi Issues

Poor coverage, dropped connections, or configuration problems.

IP Conflicts

Devices assigned clashing addresses, disrupting connectivity.

Cabling Faults

Damaged, incorrectly terminated, or degraded structured cabling.

Poor Performance

Slow or unreliable connections affecting daily operations.

What We Check

A Full Networking Service

Scoped to your specific site — this is the range of what a technician may inspect.

Switch/router function test

Cable & port testing

Wi-Fi coverage check

IP configuration review

Network device inventory

Firmware update check

UPS/backup power check

Cable labeling & documentation

Bandwidth/performance check

Security device network check

VLAN configuration review

Rack/cabinet inspection

Patch panel check

Written service report

Three Ways We Help

Repair, Prevent or Contract

Depending on the situation at your factory.

01 · ALREADY BROKEN

Fault Repair

For problems affecting the networking system right now.

Network Downtime
Switch/Router Faults
Wi-Fi Issues
IP Conflicts
Cabling Faults

Request Repair

02 · STILL WORKING

Preventive Service

For sites that want a scheduled check to catch issues early.

Switch and router function testing
Cable and port testing
Wi-Fi coverage verification
IP configuration review
Firmware update checks

Schedule Service

03 · ONGOING

Maintenance Contract

For sites that need guaranteed coverage and priority response.

Scheduled inspections
Priority response
Agreed response arrangement
Preventive + corrective coverage
Written reporting

Discuss a Contract

We Didn't Install It? That's Fine.

Properties change hands, contractors move on, and the original installer of your networking system may no longer be around. None of that means the system is beyond help.

We assess the existing equipment and configuration, then tell you plainly whether it can be:

Repaired as-is
Reconfigured
Upgraded in part
Partially replaced
Fully replaced, if that's genuinely the sensible option

We can't promise every third-party system is repairable sight unseen — some equipment is genuinely past its useful life — but we assess before we conclude that.

Process

How a Networking Service Runs

Briefing

What's happening, and what should be reviewed.

Site Walk

Inspecting the relevant areas of your factory.

Diagnose

Equipment, wiring, power and configuration.

Report & Recommend

Written findings — repair, upgrade or replace.

Approve & Repair

Scheduled at a time that suits your operations.

Handover

Report and documentation for your records.

Technical Honesty

Repair, Upgrade or Replace?

Repair

Restore the existing switch, router or cabling where practical — most network faults are configuration or connection issues.

Upgrade

Replace the specific switch, router or cable run that has failed or is undersized, while keeping the usable infrastructure.

Replace

Recommended where network hardware is obsolete, unsupported, or genuinely inadequate for current device load.

Factories & Industrial Sites We Service

Areas We Cover

Production Floor

Coverage over manufacturing and assembly areas.

Loading Bays

Vehicle and goods movement points.

Perimeter & Fencing

Boundary security around the site.

Staff Entrances

Employee access and time-clock areas.

Storage Yard

Outdoor materials and finished goods storage.

Control Room

Site security or operations control point.

FAQ

Common questions about networking maintenance

How often should networking systems be serviced in a factory?

Most factory sites benefit from servicing every 6 to 12 months, depending on usage and exposure to the elements.

Can you service systems installed by another company?

In most cases yes — we assess the equipment and its condition first, then confirm what can be serviced or repaired.

Do you offer maintenance contracts for factories & industrial sites?

Yes. Maintenance contracts are scoped to the number of devices, sites, and required response times — contact us to discuss what a contract would cover.

What if the equipment can't be repaired?

We tell you plainly and quote for the specific replacement needed, rather than repeated repair attempts on something that genuinely needs replacing.

Do you provide a written report after servicing?

Yes — every scheduled service visit includes a written record of what was checked, found, and recommended.

Can you improve Wi-Fi coverage without rewiring everything?

Often yes — coverage issues can sometimes be resolved with access point placement or configuration changes rather than a full rewire. We assess this on-site.

Networking Issue? Let's Sort It.

Tell us about your factory and the issue. We'll help figure out the right next step — repair, upgrade or a maintenance arrangement.

WhatsApp Qyvea Call +254 113 301 244

Diagnosis before repair

Any installer, assessed first

Written service reports