On this page
01. The problem02. How it works03. What to check before you buy04. How we set it up05. What we supply06. How to put it to the hospital07. Get a free survey and quote08. FAQ
Walls alone do not secure a hospital. Here is how lighting, cameras and alarms make the perimeter work.
Key takeaways
- Lighting
- Cameras
- Fence or alarm
- Response plan
01The problem
A wall is only a delay. A secured perimeter adds light, cameras and a fence alarm so that anyone approaching is seen early and a guard can respond. The layers work together.
02How it works
03What to check before you buy
| Check | Why it matters |
|---|---|
| Weak points | Gates, corners, shared walls |
| Lighting | Even and bright |
| Camera cover | Overlapping |
| Response | Guard training |
| Maintenance | A plan, spares and a response time agreed before you buy |
| Your own requirements | Confirm them with your regulator and advisers |
04How we set it up
- 01Walk a hospital perimeterWe note every door, room, route and risk.
- 02Draw the planWhere perimeter security goes and what it covers.
- 03Cable and powerCabling, power and backup to every point.
- 04Fit and configureInstalled, set up and labelled.
- 05Test and trainWe test every point and train your staff.
05What we supply
We design, supply and install perimeter security for hospitals, clinics and care homes. Send us a plan or a photo and the number of rooms or doors and we reply with a written quote.
06How to put it to the hospital
Start with the problem a hospital perimeter already has, in the words your reader would use, then show what changes. Quote the full scope for a hospital perimeter, including cabling, power, installation, training and maintenance, and say plainly what the system does and does not do.
07Get a free survey and quote
08Frequently asked questions
Do we need all layers?
Choose by risk and priority.
Can we phase it?
Yes.
Who responds?
Guards or a response partner.
