Security
CCTV InstallationAccess ControlBiometrics & AttendanceElectric FencingAutomatic GatesFire Alarm SystemsSecurity Guards & K9Power & Electrical
Solar InstallationSolar & Power BackupElectrical InstallationSmart Home AutomationBuilding Management (BMS)IT & Networking
Networking & Wi-FiIT SupportCyber SecuritySystem IntegrationIntercom SystemsPA SystemsPOS SystemsQueue Management
An underground swing gate operator from CENTURION for a single gate leaf up to 3m and 500kg -- mounted below ground rather than visible arm-and-bracket hardware, which suits properties that want automation without changing the gate's appearance.
The Nova is an underground swing gate operator -- rather than a visible arm mounted on the gate post, the motor sits in a below-ground housing, driving the gate leaf from underneath. This single-arm version handles one gate leaf up to 3m wide and 500kg. It suits properties where a visible surface-mounted arm isn't wanted, or where the gate posts and pillars are already built without space for one.
Automating an existing single-leaf swing gate without changing its look.
No room for a surface-mounted arm bracket.
Keeps the gate's appearance unchanged with hidden mechanics.
Specified from the start alongside a new swing gate build.
A dependable, well-known brand for a motor swap.
A widely serviceable brand with available spare parts in Kenya.
| Capacity | Single leaf up to 500kg, 3m |
| Mounting | Underground |
| Gate type | Swing |
| Safety | Obstruction detection |
220-240V AC mains supply to the motor unit.
Not applicable for this product.
Not applicable for this product.
Warranty terms are set by the supplying distributor and confirmed at the time of purchase -- ask us for the current terms before ordering.
Official CENTURION datasheet available on request -- ask us on WhatsApp.
The CENTURION Nova Swing Motor is one part of a bigger picture -- here's how it connects to the rest of what Qyvea offers.
Underground swing operators need a below-ground housing installed at the hinge point before the motor itself is fitted, which is more involved than a surface-mounted arm. Qyvea installs the Nova as part of our Automatic Gate Installation service -- see our behind-the-scenes quality checks on gate motor kits before installation.
Underground swing operators benefit from periodic checks of the housing seal, hydraulic or mechanical components and control board, since the mechanism sits below ground level. Qyvea offers ongoing automatic gate maintenance, whether it was installed by us or someone else.
It keeps the gate's appearance unchanged and works well where the gate posts don't have room for a surface-mounted arm bracket -- a common consideration on more architecturally finished properties.
A single gate leaf up to 3m wide and 500kg. For a double (two-leaf) swing gate, the dual-arm Nova version is used instead.
Yes -- it requires a below-ground housing installed at the hinge point, which is more involved than fitting a visible arm bracket, but the trade-off is a cleaner finished appearance.
Both. Buy it alone for your own installer, or have Qyvea supply and install it as part of a full automatic gate project.
Cost depends on the gate, ground/foundation work needed for the underground housing, and site accessibility. Qyvea provides a free site survey and itemised quote alongside the motor price.
KES 39,000 unit price. Free site survey if you'd like Qyvea to supply and install the full gate automation.
The full installation service this motor belongs to.
Compare this motor against other CENTURION, BFT and FAAC models.
The sliding-gate alternative to this swing motor.
What Qyvea checks before a motor reaches your site.